Tuesday, 19 July 2016

NonLinearCircuits - Dual Drums Build notes.

These are my build notes for the NLC Double drum module.
Andrew did include the Dual Drum in one of his 4U drum panels


I plan to put this in with my Buchla. I don't have a face plate so will make that too.

From Andrew's notes:
"The core design was originally (used) in a Japanese DIY
magazine from the late 70s and was intended as a standalone, self
—contained device to be used with a drum kit. 

The cool thing about this module is that it uses an envelope detector
so most input signals should trigger this.

 firstly the virgin PCB.




I usually solder the SMDs first ... to both sides of the PCB.




The 22n SMD should be a 22k resistor?



BC547 --- NPN transistor - four needed --- the unlabeled trannies on PCB
BC557 --- PNP transistor - just two needed.... marked as pnp on the pcb.
Diodes - I'm using 1N414s



The unmarked caps are for the decoupling caps - using 47nf ceramics.

Time to make the panel. It's something a bit out of the square, ..... a half size Buchla panel.


The rear of the panel.



The 1k LED resistors seen to work fine.


First tests:


Some useful links:
1. Andrew's build notes.
2. Drum Panel (8)
3. Youtube 1 - Drum 
4.  Youtube 2 - Dual Drum Module
5. NLC Blog 1 - Dual Drums & Dr Go Go 
6. Youtube 3 - Dual Drums & Dr Go Go 
7. NLC Blog 2 - Dual Drum Module

---------------------------------------------
++++ My NLC index +++++++

No comments:

Post a Comment